How To Build Double Pole Wooden Scaffolds 3




Basic Construction And Carpentry Techniques Home





Nailing The Outside Uprights, Sill, Ledger & Ribbon Boards

6.Place the outside sill on the ground. The minimum distance between outside and inside sill is 20 inches (508 mm). A 2 by 10 inch (51 mm by 254 mm) four board scaffold would be 40 inches (1016 mm) wide between uprights. 
7.Set up and nail the two end outside uprights on the outside sill.
8.Nail the levelled ledger boards to the outside uprights.
9.Nail the ribbon board below the outside upright ledgers.

Figure 3








Custom Search







       
                                                                 
                                                Double Pole Wooden Scaffold Links


                                                     1.Double Pole Scaffold: Nail The Inside Uprights, Sill, Cleats & Ribbon.
                                                     2.Double Pole Scaffold: Nail The Intermediate Uprights.
                                                     3.Double Pole Scaffold: Nail The Outside Uprights, Sill, Ledger & Ribbon Boards.
                                                     4.Double Pole Scaffold: Nail Intermediate Uprights, Ledgers, Planks & Ribbons.
                                                     5.Double Pole Scaffold: Nail The Outside Diagonal Braces & Guard Rails.
                                                     5.Double Pole Scaffold: Nail The Toe Boards.
                                                     7.Double Pole Scaffold: Components Of A Double Pole Wooden Scaffold.






Basic Construction And Carpentry Techniques Home
                                                     






                                                                                                         


Custom Search

Written and maintained by
Ronald Hunter
           
  All images and text are copyright Ronald Hunter 2005 to 2011
  All rights reserved
Top